14
CONTROLS
Control panel view Jasic Cut 61 and 81
Number
Symbol
Function
1
-
Digital ammeter which displays the preset and actual current when cutting.
2
Power indicator. When illuminated indicates that the machine is
powered on. Once a welding arc has been established this LED will flash.
3
Overheating indicator. Normally off. If this LED is on it indicates that the
temperature inside the machine is too high and the machine is under over
heating protection status. When lit the machine stops working, then allow
the machine to cool down.
4
A
Current control dial, this function allows the user to set the required
current demand which is displayed on the digital ammeter.
5
-
Pressure gauge which will display the preset pressure set by the pressure
regulator.
6a
2T indicator: It illuminates when the machine is under 2T torch trigger
control.
6b
4T indicator: It illuminates when the machine is under 4T (latch) torch
trigger control.
7a
Gas-check indicator: It illuminates when the machine is under gas-check
status. When lit, the machine cannot cut.
7b
Work Light: When the Cut 60 and 80 plasma cutters have gone from
piloting to actual cutting this indicator will come on to show that you
have transferred and will stay on as long as you are cutting the material.
