Jasic EVOLVE 200, Руководство пользователя

Страница: 34 / 56

EVOLVE 200 USER MANUAL
32
2.8.3 JOBS
The machine can save up Nr.100 Jobs in the MIG Synergic mode.
10 Demo Jobs are available from Job 101 to Job 110.
If a Job is selected, the reference Nr. of the Job is showing in
the display.
By the Job menu it is possible :
2.8.3.1 UPDATE JOB
If the protection level allows, it is possible to update the modified data of the current job. (See Job protection
Level section)
2.8.3.2 SAVE IN A NEW JOB.
Copy the actual working data in a new Job.
Select Save in a new Job by knob1, confirm by pushing the knob, select the job NR. to save it and confirm
by pushing the knob.
The free jobs Nr. are shown in the display. The used jobs Nr. are shown in the display.
UPDATE JOB: Update the selected Job with the
modified data. It depends from the
“
Job protection
level” (see Job protection Level section).
SAVE IN NEW JOB: Save the actual JOB data in a
New JOB Nr.
JOBS “material” “diameter” “gas”
Can scroll the Jobs with same three data: -Material
type, -Wire diameter, -Gas type
SCROLL ALL JOBS: You can scroll through all
available jobs.
EXIT JOB: Exit from selected Job.
When no Job is loaded
, all data are freely editable.