12
GENERAL INFORMATION
The following operation requires sufficient professional knowledge on electric aspects and
comprehensive safety knowledge. Make sure the input cable of the machine is disconnected
from the electricity supply and wait for 5 minutes before removing any machine covers.
Packaging, transportation, storage and waste disposal
Transportation requirements
When handling the water cooler, the item should always be handled with care, and should not be
dropped or severely impacted. Avoid moisture and rain during transportation.
Storage
Storage temperature:
-
20°C ~ +60°C
Storage humidity: Relative humidity
≤ 90%
Storage period: 12 months
Storage site: Indoors with no corrosive gas and air circulation
Waste disposal
The equipment is manufactured with materials, which do not contain any toxic or poisonous materials
dangerous to the operator.
When the equipment is scrapped, it should be dismantled separating components according to the type
of materials.
Do not dispose of the equipment with normal waste. The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment states the electrical equipment that has reached its end of life must
be collected separately and returned to an environmentally compatible recycling facility.
In order to comply with WEEE regulations in your country you should contact your supplier.
RoHS Compliance Declaration
We herewith confirm, that the above mentioned product does not contain any of the restricted
substances as listed in EU Directive 2011/65/EC in concentrations above the limits as specified therein.
Disclaimer: Please note that this confirmation is given to the best of our present knowledge and belief.
Nothing herein represents and/or may be interpreted as warranty within the meaning of the applicable
warranty law.
ROUTINE MAINTENANCE
•
Check the coolant level of the cooler before each use and ensure the coolant level is not lower than
the minimum water level.
•
Carry our regularly safety inspection of the water cooler to ensure to water and electrical connections
are secure. Damaged and loose parts should be replaced and reinforced.
•
Regularly clean inside of the machine. (if cleaning the machine with compressed air, then ensure the
air is clean and dry and not high air pressure in order to avoid damaging components.
•
If the machine is left unused for a long time; coolant in the water tank should be drained.
