Jasic EVO 2.0 ET-200PACDC, Руководство пользователя

Страница: 49 / 80

49
EVO20 TIG200ACDC - TIG AC Pulse Quick Set - Up Guide
For AC TIG welding, set up as below and ensure you place the machine in AC TIG mode, Pulse ON,
HF ON and in 2T trigger mode.
AC BALANCE AC FREQUENCY
PEAK AMPS BASE AMPS DOWN SLOPE
PRE FLOW GAS START AMPS UPSLOPE PULSE FREQUENCY PULSE WIDTH FINAL AMPS POST FLOW GAS
Set parameters as follows using control panel image above as reference
Parameter Units Adjustable Range Guide Setting User Setting
Job/Material --- --- ---
PRE - GAS TIME Seconds 0 ~ 3 0.5
START - CURRENT Amps 5 ~ 200 20
UP - SLOPE TIME Seconds 0 ~ 10 0
PEAK WELDING AMPS* Amps 5 ~ 200 User defined *
BASE AMPS** Amos 5 ~ 200 50% **
AC FREQUENCY Hz 20 ~ 200 70
AC BALANCE % 20 ~ 60 40
PULSE FREQUENCY Hz 0.2 ~ 200 1
PULSE WIDTH % 10 ~ 90 50
DOWN - SLOPE TIME Seconds 0 ~ 10 1
FINAL CURRENT Amps 5 ~ 200 10
POST - GAS TIME Seconds 0 ~ 15 3
* Depends on material thickness (30A per mm) eg. 3mm = 90A
** Set base current to 50% of your peak welding current
Please Note:
If you have Smart Gas set
to ON, then you will not
have the option to adjust
post
- gas time.