Jasco V-630, Руководство по оборудованию

Страница: 14 / 46

1
1 Unpacking and Installation
WARNING! :
This section is intended for trained JASCO servicemen. If the user
attempts unpacking and installation, injury may result. Please leave
unpacking and installation to your JASCO serviceman.
CAUTION:
Use this manual when you are unpacking/installing the instrument in
conjunction with a JASCO serviceman’s instructions in the case of a
problem.
1.1 Unpacking
(1) Unpacking the main unit
Take out the main unit from the carton and make sure that the serial No. displayed on the serial
No. label located on the left side of the unit and the serial No. on the inspection certificate agree.
Also ensure that the line voltage is consistent with the power requirement of the instrument.
MODEL
SERIAL No.
POWER
PROTECT
CLASS I MADE IN JAPAN
JASCO Corpration
日本分光株式会社_
192-8537 東京都八王子市石川町 2967-5
AC V 50/60Hz VA
Serial Number
Line voltage, frequency
Figure 1.1 Serial No. label
(2) Unpacking the standard accessories
Remove the standard accessories from the carton and check them against the packing list. If you
find any parts missing or damaged items, contact your local JASCO distributor.
Table 1.1 List of Standard Accessories for V-630 iRM Type
Description Qty. Comments
Intelligent remote module （ iRM ）
iRM touch pen
Compact flash
Card adapter
Holmium glass
Time-lag fuse
AC power cable
Allen wrench
Certificate of inspection
Instruction manual
1
1
1
1
1
2
1
1
1
1 set
Bifunctional holmium glass
holder/shielding plate
For adjustment of the light source
mirror