vi
Regulatory Statements
CE Notice
Marking by the symbol
indicates compliance of this JASCO system to the EMC
(Electromagnetic Compatibility) and Low Voltage Directives of the European Community.
This symbol indicates that this JASCO system meets the relevant basic safety and health
requirements of the EC Directive based on the following technical standards:
・
EN55011 ---- “Limits and Methods of Measurement of Radio Interference Characteristics
of Information Technology Equipment.” ---- Group 1, Class A.
WARNING
: This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to
take adequate measures.
・
EN50082-1 ---- “Electromagnetic compatibility ---- Generic immunity standard Part 1:
Residential, commercial, and light industry.”
・
IEC1000-4-2 ---- “Electromagnetic compatibility for industrial-process measurement and
control equipment Part 2: Electrostatic discharge requirements.” ---- Severity level 3.
・
IEC1000-4-3 ---- “Electromagnetic compatibility for industrial-process measurement and
control equipment Part 3: Radiated electromagnetic field requirements.” Severity level 2.
・
IEC1000-4-4 ---- “Electromagnetic compatibility for industrial-process measurement and
control equipment Part 4: Electrical fast transient/burst requirements.” ---- Severity level 2.
・
IEC1010-1: 1990 + Amd.1:1992 + Amd.2: 1995 ---- Safety requirements for electrical
equipment for measurements, control and laboratory use.
・
A “Declaration of Conformity” in accordance with the above standards has been made and
is on file at JASCO EUROPE srl, Via Confalonieri 25, 22060 CREMELLA (Lc), Italy.
