brake timer, specifications
and installation instructions
page 12 of 16
Models SEC 230--4 and 230--4LN
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457-4926
UNITED STATES OF AMERICA E--MAIL.
TEL. 860-347-7271 FAX. 860-347-6978 WWW.
jarvisproducts.com
JARVIS
6204016.
®
Figure F
ATD / BRAKE TIMER
SETTINGS
SPECIFICATIONS
Motor Power
2.25 hp
1700 W
Operating Voltages
42V, 115V, 230V, 400V, 415V, 3 phase, 50 Hz
208V, 240V, 380V, 480V, 575V, 3 phase, 60 Hz
Blade Speed
1350 rpm at 50 Hz
1650 rpm at 60 Hz
Control Handle
Electric Dual Anti-tie-down or One Trigger (CE)
Brake
Electric (DC) or Mechanical
Blade Diameter
9.1 in
230 mm
Cutting Depth (max.)
3.0 in
75 mm
Overall Length
24 in
610 mm
Weight
40 lbs
18.1 kg
Vibration
less than 108 dB < 0.25 m/sec
2
Noise (one meter from tool)
less than 80 dB
INSTALLATION INSTRUCTIONS
IMPORTANT: ALWAYS DISCONNECT THE POWER SUPPLY
IN ACCORDANCE WITH OSHA’S LOCKOUT/TAGOUT PRO-
CEDURES (29 CFR 1910.147) BEFORE PERFORMING ANY
REPAIRS OR MAINTENANCE. ALL WIRING MUST BE DONE
IN ACCORDANCE WITH NATIONAL, STATE AND LOCAL
ELECTRICAL CODES.
1 Install the electrical control box (DC brake models)
in a convenient location.
2 Wire the electrical control box.
Note: Electrical
control boxes are different for different power sup-
plies. You must have the proper control box for your
power supply. Refer to Table 2, page 10 for control
box numbers.
2.1 Attach terminals to the appropriately rated pow-
er supply.
See wiring diagram inside control
box cover.
3 For mechanical brake models, wire electrical cord
(item 96) to appropriately rated power supply.
Refer
to Wiring Diagrams on page 11 as a guide. Note:
plug connections and starter are supplied by cus-
tomer.
