Jarvis ERS-1, Руководство пользователя

Страница: 3 / 12

notice to operators, maintenance
and cleanup personnel
Model ERS--1
page 3 of 12
6
JARVIS
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457-4926
UNITED STATES OF AMERICA E--MAIL
jarvis.products.corp@snet.net
TEL. 860-347-7271 FAX. 860-347-6978 WWW
.jarvisproducts.com
6205013.
®
NOTICE TO OPERATORS, MAINTENANCE AND CLEANUP PERSONNEL
REMOVE ANY MALFUNCTIONING TOOL FROM SERVICE
REPORT ANY PROBLEMS TO YOUR SUPERVISOR
1. Disconnect the power supply in accordance with OSHA’s lockout/tagout procedure (29 CFR 1910.147)
before making any blade changes.
2. Disconnect
the power supply in accordance with OSHA’s lockout/tagout procedure (29 CFR 1910.147)
before performing any repair or maintenance.
3. Disconnect the power supply -- or have the power shut off -- in accordance with OSHA’s lockout/tagout
procedure (29 CFR 1910.147) before performing any cleanup.
4. Disconnect the power supply when the tool is not in use.
5. Never
put fingers, hands or other parts of the body on the blade or within the cutting path of the tool
when it is connected to the power supply.
6. Always wear eye protection in accordance with OSHA’s eye and face protection requirements (29 CFR
1910.133).
7. Always wear cut protective gloves when handling the blade.
8. Test
the tool prior to use or daily.
Depress
the trigger and the tool should start.
Release
the trigger and
the tool should stop. If the tool malfunctions, remove it from service and report or repair it immediately .
9. Never depress the trigger unless you want to use or test the tool.
10. Never make modifications or alterations to the tool.
Report or replace any missing or illegible labels.
11. Always use both hands when starting and operating the tool to avoid the risk of possible “kick back”
or “recoil”.
Continue
holding the tool with both hands until the saw blade comes to a complete stop.
Keep hands clear.