14
PUMP OVERVIEW – OC-20
B
The power switch is located on the right side of the pump. Press
“On/Off”
to start or stop the pump.
READY
Inflating the mattress takes approximately 15 minutes. When the
“Ready”
lamp is lit,
the mattress is ready to use.
COMFORT
There are six comfort modes to choose from. The patient’s experience of lying on the
mattress is affected by the comfort mode chosen. Press this button to cycle through modes.
ALARM
If the alarm sounds, press this button to mute and reset. The adjacent
“Low”
lamp will
light up if the air pressure in the mattress is too low. Check if necessary for any air leakage
(see page 12). The adjacent lamp marked “ ” will light up in the event of a power failure.
A
B
C
D
E
C
A
