PREFACE BY MUSICLIFE LTD.
PREFACE BY JEAN-MICHEL JARRE
IN THE BOX
PRODUCT DESCRIPTION OF THE AEROSKULL®
AEROSKULL® QUICK START
AEROSKULL® REMOTE CONTROLL
OPERATING THE AEROSKULL®
OPERATING THE REMOTE CONTROLL
MAINTAINANCE AND CARE
FIRST HELP BEFORE ASSISTANCE
SAFETY INSTRUCTIONS
APPENDIX I – COMPATIBLE DEVICES
APPENDIX II – AEROSKULL® GUARANTEE
APPENDIX III - PRODUCT FAQ
APPENDIX IV - TRADEMARKS & CERTIFICATIONS
First Help before assistance
If you have any questions regarding the compatibility of your iPod/iPhone product with the AeroSkull®, visit
support.jarre.com
for the most updated information.
Problem
Possible Cause of the problem
Possible solutions
Do not hear any sound
from the AeroSkull®.
No Power Supply
The volume level is too low
Your iPod or iPhone product does not have
songs in memory or it does not work
The Apple product is in < stop > mode
or < pause > mode
The product does not
switch on.
The remote control is not
working.
The iPod is not responding
or not charging.
Make sure that the electric plug is connected to
AC Socket and the switch is in < On > position.
Check on the Apple product screen that the song
track is playing.
The plug is not fully inserted in the socket
Check that the plug is correctly inserted into the
socket.
Try to plug and unplug your AeroSkull®.
The battery is out of power.
Sensor not in accessible range by the
remote.
The battery has been installed in the
wrong position.
Replace the battery.
Check that no obstacle is between the remote and
the infrared sensor.
Open the remote battery cover and check that the
(+) side is on the top.
The iPod is not fully inserted on the
connector.
The adapter does not matching the Apple
product model.
Unplug the iPod and plug it in again.
Check the instruction manual and make sure that the
adaper matches the Apple product you are using.
Check other input USB or Line-in; if OK, check with
another Apple product.
Check that the mute function is Off. Increase volume.
