1.
2.
3.
4.
5.
6.
1.
2.
If your bluetooth device support NFC you will be able to use the feature
by tapping your NFC device on the top of the
One Touch Pairing
AeroSkull XS + (Close to the Power button). The NFC sensor is located on the top of the product above the Power button.
Line-in mode
What do you need:
1 AeroSkull XS +
a 3.5 mm audio cable
an audio device with Line out 3.5 mm port
To enable line-in mode you can connect a 3.5mm jack to the AeroSkull XS +® and play audio directly from your favourite device. Line-in port is
located at the back of the AeroSkull XS +® next to the Micro USB port.
(image: Line-in at the back of the AeroSkull XS +)
Wireless Stereo Mode
What do you need:
2 AeroSkull XS +
a bluetooth device
AeroSkull XS +® ships with true wireless technology which allows wireless stereo mode. With true wireless you can enable right and left
channel wirelessly using two speakers.
Enable True Wireless
To enable True Wireless take the following steps:
Power On
speaker first (i.e. plug in the power)
one
Pair the Bluetooth device of your preference to the speaker and wait for the jingle "device connected".
Put the speaker into left channel mode by holding down at the same time for about 3 seconds Volume down
and Power button until
you hear the jingle "left channel".
Power On the other speaker (i.e. plug in the power)
Put the speaker into right channel by holding down at the same time for about 3 seconds Volume up
and Power button until you
hear the jingle "right channel".
Wait a few seconds for the jingle "device connected".
Disable True Wireless
To disable True Wireless mode take the following steps:
Un-pair the Bluetooth Device from the speaker.
Press volume up and volume down buttons on both devices for about 3 seconds until you hear the jingle "true wireless off".
(image: show image sequence on how to enable true wireless for AeroSkull XS +)
Maintenance and Care
Maintenance may include periodically cleaning the AeroSkull XS +®.
8.1. Cleaning
Turn off the AeroSkull XS +® and unplug it before cleaning.To clean the exterior, use a soft, dry cloth.
DO NOT USE SOLVENTS OR SPRAYS.
DO NOT ALLOW LIQUIDS TO SPILL OR OBJECTS TO DROP INTO ANY AeroSkull XS +® OPENING.
8.3. Battery precautions
The battery must not be open.
The battery must not be short circuit.
