Custom Programming Tool
The JC-1260A series doesn’t need any drivers for PC. For K series (JC-1260AK), it just emulates
normal keyboard interface, and sending data just as normal PC keyboard.
You can get the card data by using notepad (Windows system) or in DOS prompt or any words editor.
For R series (JC-1260AR), communicates via RS232 port (COM) to PC.
You can connect 1260AR to a RS232 COM port on PC which is free for use (for example: COM2) and
get the card data by some kinds of RS232 communication software. In programming language software,
just open the COM ports to reads data. For example in Visual Basic, use MSCOMM32.OCX for design
the RS232 communication program and get the card data.
All settings of 1260A can be programmed by the programming tool which include in the CD,
The programming tool supports for Windows OS system like: Windows 95/98/Me/NT/2000/XP …
Please run the setup.exe first to install to your windows operating system, after the installation, run the
1260A.exe to start the programming.
1. Auto detecting the 1260AK/1260AR
The programming tool will start to auto detect the 1260A/1260R which was connected to PC. You
can press the button [CANCEL] to abort the auto detection.
But you need to know what’s 1260A interface you are using when the programming tool requests
you to set later.
2. Main interface sets
If Auto detection was ok, then main screen shows the operating mode of 1260A that you are using. The
image PIC-01 will be shown when 1260AK (keyboard mode) detected.
Or, The main screen will be shown as PIC-02 when 1260AR (RS232 mode) detected.
(The COM port is 2 for example)
7
