NOTE: WHEN INSERTING SCREWS, TURN CLOCKWISE UNTIL TIGHT,
THEN LOOSEN 1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY
ASSEMBLED, RETURN TO EACH SCREW AND TIGHTEN. USE WAX OR
SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
STEP. 1
Attach stationary side (J) to
end panels (I) by using 4 bolts
(A) and allen wrench provided.
NOTE: WHEN ASSEMBLING THE
STATIONARY SIDE AND DROP SIDE,
PLEASE MAKE SURE THE TEETHING
RAIL IS ON TOP.
STEP. 2
Insert the hardware (H) into parts (L).
To attach part (L) to parts (I),
insert hardware (B) into parts (I).
Use hardware (C) to lock part (L)
in place.
JCP001C/NC (Cherry), JCP001W/NW (White)
ASSEMBLY INSTRUCTION FOR "343-8802"CRIB
