Japan Tiger Fast Ethernet 7100e+ Скачать руководство пользователя страница 146

Страница: 146 / 160

Fast Ethernet

7100e

146

Problems printing via TCP/IP

Printer cannot find the Fast EtherNet

· If the printer is on, turn the printer off and then on again.

· Check if there is a response to ping.

· Check if the network cable is correctly connected. If needed,

change the cable and try again.

· Run the Fast EtherNet self-diagnosis test, check if the values

of the “IP Address”, “Subnet Mask” and “Gateway Address”
are correct. If they are incorrect, reset the relevant values.

· It is possible that the “TCP/IP protocol” of the Fast EtherNet

is disabled. If it is, change it to “Enable” using the Fast
EtherNet-related utility.

· Turn the printer off, switch on DIP Switch [2] of the Fast

EtherNet and turn the printer on again, initialize the Fast
EtherNet and reset the IP address.

· If DHCP, BOOTP and RARP are not used, ensure these

features have been disabled on the Fast EtherNet.

Cannot print with lpr and ftp

· If the printer is on, turn the printer off and then on again.

· Check if there is a response to ping.

· Check if the network cable is correctly connected. If needed,

change the cable and try again.

· Check if the host name and IP address of the Fast EtherNet

are set in the workstation.

· Check if the printer port name of the Fast EtherNet is set in

the workstation.

There are 3 port names – lp, euc and sjis. euc and sjis are
specific to postscript printers. If a printer driver is used, lp
should be set.

The user name on the banner page?

· If printing with LPR, the User name printed is “unknown”

and the File name printed is the “Spool file name”.

· If printing with FTP, the User name printed is the “User

name typed in during the FTP login” and the File name
printed is the “Transmitted file name”. If the print directory
name is indicated in the put command, the File name is not
printed. The Printer printed is the “Logical directory name”.

7100e+.p65

25/08/99, 20:55 PM

146

Содержание Fast Ethernet 7100e+

































































































































































Результаты поиска

Содержание Fast Ethernet 7100e+

Отзывы:

Похожие инструкции для Fast Ethernet 7100e+

Бренды по названию

Популярные бренды

Japan Tiger Fast Ethernet 7100e+, Руководство пользователя

Результаты поиска

Содержание Fast Ethernet 7100e+

Отзывы:

Похожие инструкции для Fast Ethernet 7100e+

Бренды по названию

Популярные бренды