Japan Tiger Fast Ethernet 7100e+, Руководство пользователя

Страница: 104 / 160

Fast Ethernet
7100e +
104
NetWare Settings Configuration of the NetWare protocol
NetWare Print Server
Name
(Machine name)
NetWare Mode
Determine if the operation mode of the Fast EtherNet is a print server mode
(PSERVER) or a remote printer mode (RPRINTER).
Print Server Mode Configuration when the Fast EtherNet is used in the print server mode
In the print server mode, type in the
“Print server name” recorded on the
file server. Make sure that it is consistent
with the print server name recorded
on the file server. The print server
name can be up to 31 alphanumeric
characters long.
Password
In the print server mode, this is the password used to log into the file
server. Make sure it is consistent with the password set on the file
server. The password can be up to 31 alphanumeric characters long.
Job Polling Rate
In the print server mode, indicate the interval of validating
the print queue status. If the value set is small, more burden
will be loaded on the network. If the value set is high, the
printing response will deteriorate. Normally use the default.
The value set is between 2 and 255 seconds.
Bindery Mode
In the print server mode, if used from the NW4.1J bindery
or NW3.12J, make sure that “Enable” is selected [for the
bindery mode]. Select “Disable” only when using the
NW4.1J NDS.
Tree Name
In the print server mode, type in the “Tree name” which is
in the file server. The tree name can be up to 31
alphanumeric characters long.
Context
In the print server mode, type in the “Context name” which
created the print server. The context name can be up to 31
alphanumeric characters long.
File Server Name
In the print server mode, type in the “File server name”
which manages which manages the printer. Up to 8 file
servers can be set. The file server names can be up to 31
alphanumeric characters long.
7100e+.p65 25/08/99, 20:52 PM 104