Japan Radio Co. WIPAS2, Инструкция по эксплуатации

Страница: 72 / 101

5-54
V
（
a
）
Direction adjustment tool
H
Direction adjustment tool
（
a
）
5.7.1.3. Roughly Adjusting the Direction (Using the Antenna direction adjustment tool
)
Step1 As shown in Figure and Figure5-38, use the wing bolt (a) to attach the Antenna direction
adjustment tool.
Step2 As shown in Figure 5-39, loosen the hexagonal socket head bolts (b) and (c) securing the
mounting bracket and swing the antenna left or right. Adjust the antenna approximately for
the WT direction and finger-tighten the bolts (b) and (c).
Step3 As shown in Figure 5-40, loosen the bolts (d), (e), (f) and (g) and tilt the antenna up or
down. Perform vertical-direction adjustment so that the WT of the opposite station can be
seen through the scope of the Antenna direction adjustment tool.
.
Figure 5-37 How to Install Direction Adjustment tool
when the antenna type is the horizontal polarization Figure5-38 How to Install Direction Adjustment tool
when the antenna type is the vertical polarization
In Figure 5-39 and Figure 5-40 is an example when the antenna type is the horizontal polarization.
Figure 5-39 Rough-adjusting Horizontal Direction Figure 5-40 Rough-Adjusting the Vertical Direction
・
Never look at the sun directly. Doing so may seriously damage the eyes.
(b)
(c)
(d)
(e)
(f)
(g)