Japan Radio Co. NKG-84, Инструкция по эксплуатации

Страница: 16 / 100

6
6: lamp
This orange lamp blinks to indicate that the equipment has run short of printer paper.
7: switch
Pressing this switch feeds printer paper from the printer.
Paper is fed, line by line, with each press of the switch. Pressing and holding it down feeds the paper
continuously.
8: lamp
This red lamp blinks to indicate that data from the Navigator is intemple.
9: switch
This switch turns off the alarm that indicates that the equipment is running short of printer paper.
10: switch
Switch to change between Japanese and English printouts.
11:
Switch to perform ROM testing.
12:
Switch to perform RAM testing.
13:
Switch to perform self-diagnostic testing.
14: switch
The print interval; is increased each time this switch is pressed.
15: switch
The print interval is reduced each time this switch is pressed.
16: Display for indication
Displays the print interval, Japanese/English printout, and ROM and RAM test results.
17: Pinter paper
Paper used to print data. When the paper is getting low, a red line is displayed on both ends of the
paper.
18: Printer
Prints data.
▼
▲
TEST
RAM
ROM
J/E
ALARM OFF
ALARM
FEED
PAPER