5 - 10
5.2.4.7. Setting for full-duplex or semi-duplex in duplex channel
Selecting the duplex operating mode or semi-duplex operating mode.
After operating in Paragraph 5.2.1. as page 1, operate as follows:
Operation
Display
remarks
88
6
d
or
S
Entering the setting for duplex operating
mode or semi-duplex operating mode. The
existing mode will be displayed on LED.
0
or
1
d
or
S
select the duplex operating mode or
semi-duplex operating mode
0: duplex
1: Simplex
#
89
save and exit this setting
(for saving data to EEPROM)
or
＊
88
exit this setting
(for not saving data to EEPROM)
turn off the S2(dip sw)-4 on CDE-885
press the S1 on CDE-885
