11
Working
step
Shape Remarks
7
1. Insert the conductor while melting solder in the
center contact.
2. Be sure that no space is left between the
center contact and insulator.
3. Check the hole that solder flows between the
conductor and center contact. Be sure that
solder covers the conductor sufficiently and
does not protrude outside the center contact.
8
1. Insert the ring and the connector housing, and
then tighten the tightening bracket sufficiently.
2. Check the center contact is at the position
shown in the wiring completion diagram.
9
Measure the insulating resistance. The insulating
resistance is 10 M
Ω
or more.
Wiring completion diagram of N-type connector
Center contact
Insulator
