CMP-10 Service Manual
CMP-10
Rev. 1.00
P 41/41
Date: 2002.07.25
Handling Instruction for Lithium Ion Rechargeable Battery Pack
SAFETY INSTRUCTIONS
Please follow the warnings and precautions listed below to avoid possible hazards from the improper use of
batteries and to ensure correct and safe use of them. The following notes should be put in an appropriate and
effective location in each end-use product and its instruction manual.
Warning
1.
Do not short-circuit the battery, as it may generate heat.
To avoid short-circuiting, do not let the battery come in contact with metal objects at any time, especially
when transporting.
2.
Do not put the battery into a fire, as it may swell or explode. Do not use near any type of heat source.
When battery leaks electrolyte or emit a strange smell, discontinue use and move battery away from
the heat source.
3.
Cover terminals with insulating tape before proper disposal.
4.
Do not solder the battery directly. Heat applied during soldering may damage the safety vent in the
battery’s positive cover.
5.
Do not alter or disassemble the battery. Do not take off the battery’s cover or jacket.
6.
Do not deform the battery by applying pressure. Do not throw, hit or drop the battery. Do not subject
the battery to mechanical shocks.
7.
Do not submerge the battery in water, or any type of liquid.
Do not expose the battery to any type of water, such as rain or moisture, as it might heat, corrode, or
not function occasionally.
8.
Do not connect the battery reversed in positive (+) and negative (
−
) terminals. Do not charge the
battery with polarities reversed, as it may swell or explode.
9.
Do not use any chargers not specified by manufacturer .
Do not charge the battery under conditions not specified, as it may leak electrolyte, heat or explode.
10. Do not use the battery with other makers’ batteries, different types and or models of batteries such as
dry batteries, nickel-metal hydride batteries, or nickel-cadmium batteries. Do not use old and new Li-
ion batteries together, as they might leak electrolyte, heat or explode.
11.
Do not mistreat the battery, or use the battery in applications not recommended by manufacturer.
12. Do not let electrolyte come into contact with skin, eyes, or clothing. If contact with skin or eyes occurs,
immediately seek help from a doctor.
13. Keep the battery out of reach of babies and children to avoid any accidents.
14. Do not put batteries in a microwave oven or pressure cooker.
15. Although rechargeable, the battery has a limited life-span. Replace when usage time between charges
become short.
16. Do not store at or use in temperatures above 60ºC.
17. Do not short-circuit the cells when open the carton.
18. If there are any problems of the battery, immediately keep the battery at safe place and contact to Japan
CBM Corporation.
Содержание CMP-10
