1
1 Introduction
G356E consist of 5 block
(1)Main CPU board
Main CPU:M16C/80 Renesas device 16 bit MPU
RAM 4M bit (battery back up)
EPROM 4M bit CMOS
(2)
Front display unit
(3)
Rear display unit
(4)
Key board unit
(5)
Power supply unit
2 Installation procedure
2.1 unpacking
The ECR packing method is shown fig 2-1.
Unpack the ECR an check that the following items are present.
(1)
two rolls of thermal rolls 38mm
(2)
one journal Take-up reel
(3)
key set
(4)
G356E owners manual
(5)
Dust cover
If the ECR was received in a damaged carton, unpack and inspect for physical damage immediately,
As described in table 2-1. If damage is found, contact the freight carrier and file a claim promptly,.
If any parts are missing, contact JCM within one week of receiving the ECR.
Initial inspection
Perform the appearance and mechanical checks as listed on table 2-1.
The ECR cabinet can be detached by removing the three screw on the upper side of the cabinet.
The two screw is on the printer side. And other one is under the customer display unit.
It is concealed under a small cover.
Table 2-1 Check List
Inspection check
Appearance A. surface of cabinet , keyboard, and cash drawer for damage
such as dents and scratches.
B.
display windows for damage such as
cracks or scratches.
Mechanical A. all electrical connections for proper seating
B.
keys in mode lock for proper operation.
C.
Cash drawer for smooth operation when released manually.
See selection 2.3 for release details.
