Japa 485, Руководство пользователя, Страница: 37 / 48

japa
485
User manual
Translation 35 485 1.0-2014
The pusher jams at the
other end
The cylinder bottoms out
The relief valve is tripped
Adjust the stroke length (5.4.2)
Clean the machine (5.3)
The splitting motion does
not stop
The splitting stopper is jammed/does
not centre the valve Adjust the splitting device (5.4.2)
The log does not split The splitting knife is incorrectly
adjusted
The splitter setting exceeds 48 cm
The log is jammed on the knife
There is a knot in the splitting section,
the end is crooked or the log is
malformed
Adjust the level of the splitting
knife (3.7)
Remove the log
Reverse the pusher, place a
smaller piece of wood in the
groove, and test the splitting
function
Turn and position the end of the
log firmly against and
perpendicular to the splitting knife
If the splitting still does not work,
remove the splitting knife from the
machine frame for cleaning
The oil heats to over 80 °C The power take-off speed is too high
Too little/too much oil
The cylinder bottoms out
The saw valve does not return to the
middle position
MAX RPM 500 (2.5.A)
Add/remove oil (5.3 A)
Adjust the splitting device (5.4.2)
Check the adjustments (5.4.1)
The log rises up during
splitting
The stroke length is too short, which
leaves the previous log attached to the
knife Check the stroke length of the
piston (5.4.2)
The conveyor belt jams
The belt is loose
The logs collide with the conveyor belt
The belt is crooked
Tighten the belt (5.4)
The conveyor angle is too steep
(2.4.F)
Adjust the top roller of the conveyor
(5.4)
The conveyor belt does not
run A log has become wedged in the
conveyor
Wrong rotation direction (E and TRE
models)
The hydraulic hoses of the conveyor
are disconnected/loose
The relief valve leaks
Remove the wedged log
Switch the rotation direction (2.5.B)
Clean and reconnect the quick
couplings (2.7.B)
Adjust the relief valve (5.4.4)
The cutting and splitting
device functions with the
guard open
The safety mechanism is damaged See section (3.3).
Do not use the machine if you
discover that the safety
mechanism is damaged!