POTSwap v1.00 User Manual JA16-UM
Page 3 Rev: P09 Date: 01/03/18
© Copyright 2020 Janus Remote Communications
Specifications subject to change without notice
All Rights Reserved See website for latest revision. Not intended for life support applications.
TABLE OF CONTENTS continued
DISCLAIMER
The information contained in this document is the proprietary information of Connor-Winfield Corporation and its affiliates (Janus Remote Communication). The contents are confidential and any disclosure to
persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Connor-Winfield, is strictly prohibited. Connor-Winfield
makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, Connor-Winfield does not make any warranty as to the information contained herein, and does
not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. Connor-Winfield disclaims any and all responsibility for the application of the devices
characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules. Connor-
Winfield reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time
and without notice. Such changes will, nevertheless be incorporated into new editions of this application note.
All rights reserved 2016 Connor-Winfield Corporation
List of Figures
Figure 1. POTSwap Block Diagram
Figure 2. Voice Operation
Figure 3. Serial Connection
Figure 4. Front Panel
Figure 5. RJ11 Jack
Figure 6. Rear Panel
Figure 7. Serial Port
Figure 8. End Panel Screw Removal
Figure 9. Exposed Circuit Board
Figure 10. SIM Card Socket
Figure 11. Re-Assembled Unit
