Stainless Steel Baffle Filters, Grease Tray, Filter Spacers:
• Filters, grease tray, and filter spacers should be cleaned frequently (every two months of opera-
tion, or more frequently for heavy use).
1. Remove all the parts mentioned above from the hood and discard oil and residue.
2. Wash the filters, grease tray, and filter spacers in the dishwasher, or soak in hot or warm water
with dish detergent for half an hour, then wipe the filters clean. Repeat these steps until no oil resi-
due remains.
NOTE:
Stainless steel baffle filters, filter spacers and grease tray are top rack dishwasher safe.
3. Let the filters dry thoroughly.
4. Reinstall the grease tray, filter spacers, and baffle filters.
Replacing the LED Lights:
CAUTION!
Disconnect from the power source before servicing.
ATTENTION:
Wear gloves to protect against sharp edges.
CAUTION:
LIGHTS AND SURROUNDING AREAS MAY BE HOT. REMOVE WHEN COMPLETE-
LY COOL!
1. Unplug the range hood or turn off the breaker.
2. Remove filters. Reach into the interior of the range hood and locate the lamp. Gently squeeze
the lamp clips on each side and push down until the lamp pops out. Remove and unplug.
3. Replace the LED lamp.
4. Push the lamp back into its place until secured.
5. Plug in the range hood, or turn on the breaker.
15
