Vertical
Roof Venting
Roof cap
Option 2:
Side wall cap
Horizontal
Wall Venting
Option 1:
1. Place the range hood on a flat, stable surface. Connect the power cord of the range hood to a
designated standard outlet, 110̃120V/60Hz, AC only and turn the range hood ON. Verify all oper
-
ations of the range hood by referring to the
Operating The Range Hood
section of this manual,
then turn the Range Hood OFF and unplug from the power outlet.
2. Place all supplied parts and required hardware on a flat, stable surface and verify the existence
of all supplied parts listed on Page 4.
3. Remove the filters and filter spacers to reduce the weight for installation. Using the filter han-
dles, lift each filter slightly upwards towards the motor, then angle the filter downwards until it can
be removed from the hood frame.
ADVANCED PREPARATION:
• Fasten all connections with sheet metal screws and tape all joints with certified HVAC foil tape or
duct tape.
• Use caulking to seal exterior wall or roof opening around the cap.
8
