Janser Master Mobile hydrauli, Инструкция пользователя

Страница: 7 / 20

Hydraulic Stripper
MASTER-MOBIL
OPERATING INSTRUCTIONS
7
3 TRANSPORTATION
3.1 Loading / Unloading
Always remove all counterweights and blades before loading or unloa-
ding.
See figure 3.2 - A
Easy loading when not driving or using a ramp. Location on lifting
bails centrally locates the balance of the machine to safely pick-up the
machine.
1. Use a rope, a hook system or a chain through the eyelets
which are located on top of the machine.
2. Raise machine with a fork lift or a winch.
Keep hands and feet out from under machine.
See figures 3.2 - B and 3.2 - C.
Make sure the ramp is clean and dry, free of grease or oil.
1. Attach ramp securely to back of vehicle, making sure there is
good contact.
2. Position machine at back of ramp, respectively at head of
ramp.
3. Engage power switch and drive onto vehicle, respectively
drive out of vehicle.
Lowering handle may be necessary for proper clearance into the back
of smaller cars.
Make sure ramp is secure before using. Failure to do so could cause
ramp to fall away from truck, causing damage to the machine and/or
injury to the operator.
The Loading Ramp can fold up on the half for easier transport
See figure 3.2 - D
3.21 Lifting bail
3.21 Loading Ramp
FIGURE 3.2 A
FIGURE 3.2 B
FIGURE 3.2 C
FIGURE 3.2 D