Operation Manual / Spare parts list
Grooving machine KFU 830
6
2
2.1
Safety
General information
Adherence to the safety notes helps to protect against injuries and reduces the risk of an improper
utilisation of the machine. Every user of this machine and personnel charged with the assembly,
maintenance or repair of this machine must have read and understood the contents of the instructions
prior to starting any work.
2.2
Dangerousness of the machine
Attention, danger of injury at running machine
When the machine is started, acceleration takes place (generating a strong jerk). This jerk can
be the cause that the operator looses control of the machine in case of improper use.
Hold the machine firmly with both hands at the handle.
2.3
Safety instructions (operation)
Warning! Danger of life!
When crossing and damaging the electrical cable: DANGER due to electric shock!
Perform a safety check prior to each start of the machine:
•
Inspect the connecting cables and connectors/pugs for damage and improper connected load.
•
Route the electrical cables properly to prevent persons tripping over them.
•
Do not switch on the machine until it is in working position.
•
Hold the machine firmly with both hands at the handle.
•
Switch of the machine immediately when the operation is completed.
2.4
Designated use
Grooving machine KFU 830 is intended to cut welding seams of PVC, linoleum, Polyolefin, rubber,
corundum, as well as nap floors.
It is not use to cut any other materials or floors
It is not intended to use outside.
Any other applications can follow in damages or injuries for which the manufacture does not assume
any liability.
