Janser KFU 830 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 19

Janser KFU 830 Скачать руководство пользователя страница 4

Operation Manual / Spare parts list

Grooving machine KFU 830

4

The operation manual identify important notes on safety and damage prevention
using the following symbols:

Please comply with these instructions to avoid any damages and injuries.
They point to a possible dangerous situation. The nonobservance can lead to the death,
to heavy injuries and to material damages.

Warning!

Designates a potentially hazardous situation.
Please note that failure could cause death or injuries.

Attention!

Designates a dangerous situation.
Please note that failure could cause damages at products or others.

Note!

Important notes on the operation, intended for an optimum utilization of the equipment and other
useful information.

The operation manual is intended to accompany the machine.

The operation manual has been prepared by the manufacturer on the basis of his knowledge and
experience with respect to design, production and operation.

Specific instructions of the user may be added to these operation manual (for example to refer to
surveillance and reporting regulations, inter-company maintenance and inspection schedules. The
inspection intervals are in accordance with VBG 4 §§ 3 and 5 und § 20 GefStoffV (Regulations of
hazardous materials).

«
...
2
3
4
5
6
...
»

Содержание KFU 830




















Отзывы:

Нет отзывов