Janser COSMO II, Инструкция по эксплуатации

Страница: 19 / 30

Page 18
THERE IS NO POWER
1. Inspect the electrical cord, switch and/or if the circuit breaker tripped.
MOTOR NOISE
1. Make sure fan guard is not bent.
RATTLING
1. Tighten loose nuts and bolts.
MACHINE IS HARD TO HANDLE
1. Remove the counterweight.
2. Change to a smaller blade.
3. Sharpen blade.
BLOWS FUSES OR CIRCUIT BREAKERS
1. Check and/or change attached power cord. Use a 12 gauge or heavier cord, 50' or less.
2. Move to a different outlet or a better circuit.
SHANK INSERTION
If it is difficult to insert a shank into the holder, remove the paint from the shaft of the shank by using
sandpaper, emery cloth or a solvent.
TROUBLESHOOTING