18
Inserting the bobbin
z
Place the bobbin in the bobbin holder with the thread
running off couterclockwise.
q
Thread
x
Guide the thread into the front notch on the front
side of the bobbin holder. Draw the thread to the left,
sliding it between the tension spring blades.
w
Front notch
e
Tension spring blade
c
Continue to draw the thread lightly until the thread
slips into the side notch.
r
Side notch
v
Pull out about 4” (10 cm) of thread. Attach the hook
cover plate. Check the threading by referring to the
chart shown on the hook cover plate.
t
Thread
y
Hook cover plate
z
q
x
w
e
r
c
v
t
y
