18 | Installation Instructions
www.Janome.com
8. With the power cable plugged in and the motors in the engaged position (use the manual
engagement/disengagement tool if necessary), ensure that as the quilting machine is moved in both
the X and the Y directions, the corresponding gears are rotating as well.
9. Be sure to remove the manual engagement/disengagement tool before operating the Pro-Stitcher.
To attach the tablet computer
1. Disconnect the front handlebar cable from the side of the machine’s head. Then remove the
handlebars from the front of the quilting machine by removing the four hex-head bolts with a 3mm
Allen wrench.
2. Use the four screws removed in step 1 (above) to
attach the black computer bracket (F) to the white
computer bracket mount (G) as shown.
3. Position the computer bracket mount and front
handlebar assembly as shown. Use the four M4 x 12
screws (shown taped to the computer bracket mount
(G) on the parts list page). Mount both together to
the front of the machine.
