27
DRIVING MOTOR (DC MOTOR)
TO REMOVE:
1. Remove the front cover (see pages 7).
2. Loosen 2 setscrews and remove the driving motor and the belt.
TO INSTALL:
3. Install the driving motor and the motor belt with 2 setscrews.
4. Loosen the setscrews slightly and move the motor up or down to adjust the motor belt tension.
The belt should deflect 7-9 mm when applying 300 grams of load to the middle of the belt.
Tighten the setscrews firmly.
5. Attach the front cover.
Motor belt tension
REPLACING DC MOTOR AND ADJUSTING
MOTOR BELT TENSION
Setscrews (2)
Pressure 300g
Belt deflection:
7-9 mm
DC motor
Belt
Содержание NH40
Страница 1: ...SERVICE MANUAL MODEL NH40...
