Janome MO200, Руководство по обслуживанию

Страница: 17 / 33

16
MO200
5200QDC
C D
MECHANICAL ADJUSTMENT
1. Turn the power switch on
while pressing the reverse
button & auto-lock button.
2. Press the 8 button.
(The standard mode shows up if you do
not press the 8 button within 3 seconds.)
Setscrew
Cap
35mm
STRETCH STITCH FEED BALANCE
When the number 8 is sewn 5 times with the feed balancing dial at the standard setting mark, the measurement
should be between 35.7 and 36.3 mm as shown.
ADJUSTMENT PROCEDURE:
1. Turn the power switch on while pressing the reverse button & auto-lock button.
Press the 8 button. (The standard mode shows up if you do not press the 8 button within 3 seconds.)
2. Set the feed balancing dial at standard setting mark .
3. Sew 8 of number 8 and check if the measurement of five of them is between 37.7 and 36.3 mm.
4. Remove the cap and setscrew (A).
5. When the pattern is expanded, turn the adjusting screw counterclockwise "C".
When the pattern is blocked, turn the adjusting screw clockwise "D".
6. Attach the cap.
Feed balancing dial
Standard setting
mark
Setscrew (A)
▲