Janome Memory Craft 6700P, Инструкция

Страница: 66 / 112

64
b
When the buttonhole is finished, “M” mark
e
will
appear.
This indicates the buttonhole size has been
memorized.
To make the next buttonhole, position the fabric
and start sewing again. The machine sews another
buttonhole identical to the first one then stops
automatically.
To sew another buttonhole in a different size, press
the startover key
r
.
c
Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point
w
.
Then press the reverse key
q
.
v
Start sewing again, and machine sews the back
bartack and locking stitches then stops automatically
with the needle in the up position.
c
v
q
NOTE:
To cut the buttonhole opening, refer to the instructions
on page 60.
b
e
w
r