Janome Memory Craft 6700P Скачать руководство пользователя страница 11

Страница: 11 / 112

Controlling Sewing Speed

Speed control slider

You can limit the maximum sewing speed with the speed

control slider according to your sewing needs.

To increase the sewing speed, move the slider to the

right.

To decrease the sewing speed, move the slider to the left.

Foot Control

Pressing on the foot control can vary sewing speed.

The harder you press the foot control, the faster the

machine runs.

NOTE:

• The machine runs at the maximum speed set by

the speed control slider when the foot control is

fully depressed.

• You can select the desired start-up speed from

slow, medium or high (refer to page 35).

Cord storage

The cord of the foot control can be conveniently stored in

the cord storage under the base cover of the foot control.

Base cover

Cord

Hooks

Operating Instructions:

Foot control model 21380 is for use with this sewing

machine.

NOTE:

If you start the machine with the presser foot up, the

LCD screen will advise you to lower the presser foot.

Lower the presser foot and start sewing.

Содержание Memory Craft 6700P

















































































































Результаты поиска

Содержание Memory Craft 6700P

Отзывы:

Бренды по названию

Популярные бренды

Janome Memory Craft 6700P, Инструкция

Результаты поиска

Содержание Memory Craft 6700P

Отзывы:

Бренды по названию

Популярные бренды