Janome Memory Craft 6650 Скачать руководство пользователя страница 9

Страница: 9 / 108

Stitch Reference Chart

Attaching the stitch chart bracket

Align the screws with the holes on the backside of the

machine. Firmly tighten screws with screwdriver.

Stitch chart position

The stitch chart can be placed in two positions on the

chart bracket, store or view.

Back slots

Front slots

The back slots

on the bracket are for store position.

Slide stitch chart down between the back slots until the

stitch chart stops.

The front slots

on the brackets are for view position.

Pull up and out the stitch chart from back slots. Slide

stitch chart down between the front slots.

Clip board
Flip over the stitch chart (Mode 3 side) and then clip or

sewing instructions, notes, etc., to board.

NOTE:

Do not clip multiple layers of paper or cardboard.

Slide paper under clips; do not raise clips.

Содержание Memory Craft 6650













































































































Результаты поиска

Содержание Memory Craft 6650

Отзывы:

Janome Memory Craft 6650, Инструкция, Страница: 9 / 108

Результаты поиска

Содержание Memory Craft 6650

Отзывы: