Janome Memory Craft 6650 Скачать руководство пользователя страница 74

Страница: 74 / 108

Choose a soft, lightweight fabric such as batiste,

gingham or challis. Cut the fabric three times wider than

the projected width.
Sew rows of straight stitches, 1.2-1.5 cm (1/2˝) apart with

the stitch length “3.0” to “5.0” and thread tension dial at “1”

to across the area to be smocked.

1.2-1.5 cm (1/2˝)

Knotted thread

Tie the threads along one edge. From the other edge,

pull the bobbin threads to distribute the gathers evenly.

NOTE:

Pull up the bobbin thread and draw a 10 cm (4˝)

thread tail to the back before starting to sew.

Use the thread cutter on the face plate.

Sew down the left side, guiding the fabric so the right

hand stitches fall in open space. After finishing the left

side, press the mirror image key. Sew down the other

side (refer to page 85 for mirror image sewing).

Mirror image key

Remove the yarn or fabric threads between the

stitching.

Select a smocking stitch and return the thread tension

dial to 3-6.

Sew the smocking stitches between the gathered rows.
Remove the straight stitches between the gathered rows.

Straight stitch

Smocking

Pattern:

MODE 2: 059

Presser foot:

Satin stitch foot F

Thread tension:

3-6

Foot pressure:

2-3

The following stitch patterns can also be used for

smocking.

MODE 2

Содержание Memory Craft 6650













































































































Результаты поиска

Содержание Memory Craft 6650

Отзывы:

Janome Memory Craft 6650, Инструкция, Страница: 74 / 108

Результаты поиска

Содержание Memory Craft 6650

Отзывы: