Janome Memory Craft 550E, Инструкция

Страница: 9 / 84

7
Connecting the Power Supply
z
First make sure the power switch
q
is off.
x
Insert the machine plug
w
of the power supply cord
into the power inlet
e
.
c
Insert the power supply plug
r
into the wall outlet
t
,
and turn the power switch
q
on.
q
Power switch
w
Machine plug
e
Power inlet
r
Power supply plug
t
Wall outlet
q
w
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If it does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
r
t
Machine Operating Buttons
q
Start/stop button
Press this button to start or stop the machine. The button
turns red when the machine is running, and green when
it stops.
w
Thread cutter button
Press this button when you finish sewing to trim the
threads. The needle bar automatically rise after trimming
the threads.
q w
e
e
NOTE:
Make sure to use the power cable that came with the
machine.
If you turn off the power switch, wait for 5 seconds
before turning it on again.
WARNING:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug the
machine from the power supply;
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
NOTE:
If you press the start/stop button without lowering the
presser foot, the warning message
e
appears on the
visual touch screen.
Lower the presser foot and press the start/stop
button.