Janome Memory Craft 400E, Инструкция

Страница: 64 / 68

62
Oil the lower shaft supporter (front)
NOTE:
Be careful not to damage any parts when raise the
machine.
Remove the cap
q
and setscrew A
w
with a screwdriver.
Stand the machine so that the handwheel side comes to
the underside of the machine.
Insert the screwdriver from the bottom hole of the thread
cutter cover. Loosen the setscrew B
e
.
Remove the thread cutter cover
r
.
q
Cap
w
Setscrew A
e
Setscrew B
r
Thread cutter cover
q
w
r
Oil the lower shaft supporter (rear)
NOTE:
Be careful not to damage any parts when raise the
machine.
Stand the machine so that the handwheel side comes to
the underside of the machine.
Remove the cover
q
on the underside of the machine
with a screwdriver.
q
Cover
q
Oil the arrow point (felt) as indicated in the illustration.
Oil the arrow point (felt) as indicated in the illustration.
e