Janome Memory Craft 400E, Инструкция

Страница: 14 / 68

12
Built-in Needle Threader
NOTE:
The needle threader can be used with a #11 to #14
needle.
Thread size 50 to 90 is recommended.
Do not use thread size 30 or thicker.
z
Press the lockout key to lock the machine.
Lower the presser foot.
Turn the handwheel toward you to until the needle
thread sign
w
appears on the right upper corner of
the lockout window.
q
Lockout key
w
Needle threader sign
x
Pull down the needle threader knob as far as it will go.
The threader hook comes out through the needle eye
from behind.
e
Threader knob
r
Threader hook
z
c
b
v
x
q
w
c
Draw the thread from left to right, under the left guide,
threader hook and right guide.
Draw the thread around the right guide toward you.
t
Left guide
y
Right guide
v
Raise the threader slowly so a loop of the thread is
pulled up through the needle eye.
u
Threader loop
b
Remove the thread end through the needle eye to the
rear.
r e
t
y
u