Janome Memory Craft 10001, Руководство по обслуживанию

Страница: 8 / 42

q
w
e
r
y
1. Attach the Knee Lifter
q
.
2. Attach the Embroidery Foot P.
3. Lower the presser foot lever and lower the
needle to its lowest position.
4. Move the Knee Lifter
q
several times.
5. Remove the Top Cover. (See Page 1)
6. When the presser arm
w
is moving by
turning the handwheel, the clearance
between the knee lifter link (5)
e
and presser
arm pin
r
should be 0.2 to 0.5 mm
t
.
7. For the adjustment of the knee lifter play,
remove the belt cover and loosen the nut
and adjusting screw
y
under the receptacle.
After adjustment, tighten the nut and follow
steps 4 to 6 for rechecking.
8. Attach the belt cover and top cover.
q
Knee Lifter
w
Presser Arm
e
Knee Lifter Link (5)
r
Presser Arm Pin
t
Clearance 0.2~0.5 mm
y
Nut and Adjusting Screw
Checking Items after Attaching Base Unit (1)
t
6