Janome Memory Craft 10001, Руководство по обслуживанию

Страница: 21 / 42

(X)
w
t
q
r
e
Replacing Threader Plate and Adjustment
If the hook on the threader plate is damaged, replace it by following the instructions below.
Replacing threader plate
1. Turn the Power ON and lower the threader by
pressing the Auto Threader button.
2. Remove Screws A
q
and replace the
threader plate
w
.
Adjusting threader plate position
3. when the hook is slightly touching in the
needle eye, loosen Screw A
q
and adjust the
threader plate
w
position.
(If the hook position is too high or too
low)
4. Open the face cover.
5. If the hook is too high, loosen Screw
e
and
lower the setting position plate
r
.
If the hook is too low, loosen screw
e
to
slide up the setting position plate
r
.
q
Screw A
w
Threader Plate
e
Screw
r
Setting Position Plate
t
An Angle
19