Janome mc9400p Скачать руководство пользователя страница 9

Страница: 9 / 104

Controlling Sewing Speed

Speed control slider

You can limit the maximum sewing speed with the speed

control slider according to your sewing needs.

To increase the sewing speed, move the slider to the

right.

To decrease the sewing speed, move the slider to the left.

Foot Control

Pressing on the foot control can vary sewing speed.

The harder you press the foot control, the faster the

machine runs.

NOTE:

The machine runs at the maximum speed set by

the speed control slider when the foot control is fully

depressed.
This machine is equipped with an automatic shutdown

safety feature to prevent overheating whenever the

machine is running overloaded. Follow the safety

instructions that appear on the visual touch screen.

Cord storage

The cord of the foot control can be conveniently stored in

the cord storage under the base cover of the foot control.

Base cover

Cord

Hooks

Operating Instructions:

Foot control model 21380 is for use with this sewing

machine.

Содержание mc9400p









































































































Результаты поиска

Содержание mc9400p

Отзывы:

Janome mc9400p, Инструкция, Страница: 9 / 104

Результаты поиска

Содержание mc9400p

Отзывы: