Janome mc9400p, Инструкция, Страница: 13 / 104

11
r
e
t
y
i
u
o
v
Put the bobbin
t
on the bobbin winder spindle
y
.
t
Bobbin
y
Bobbin winder spindle
b
Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
n
Insert the thread into one of the slits
i
of the flange
plate
u
and pull the thread to cut.
u
Flange plate
i
Slit
m
Push the bobbin to the right. The visual touch screen
will show the bobbin winding sign.
,
Start the machine.
Stop the machine when the bobbin is fully wound and
stops spinning.
Return the bobbin winder spindle to its original
position.
.
Remove the bobbin. Cut the thread with bobbin thread
cutter B
o
.
o
Bobbin thread cutter B
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
Winding the bobbin
z
Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the guide slot
q
.
q
Guide slot
x
Be sure that the thread is pulled down under the
notch
w
and into the space below the guide slot as
shown.
w
Notch
c
Draw the thread to the left and forward around the
thread guide
e
.
Draw the thread to the rear and to the right around
and under the guide plate
r
.
Firmly pull the thread to the right while holding it with
both hands.
e
Thread guide
r
Guide plate
NOTE:
Set the speed control slider at the fastest position (refer
to page 7).
v b
n m
, .
z x
q
w
c