[TO ADJUST]:
1 REMOVE THE FACE PLATE.
CHECK THE NEEDLE DROP POSITION ON THE
STITCH PATTERN ( ) AND ZIGZAG STITCH ( )
WITH MAXIMUM WIDTH.
2 LOOSEN THE HEXAGONAL SOCKET SCREW (A)
JUST ENOUGH TO TURN THE ECCENTRIC PIN
(B). ADJUST THE NEEDLE DROP POSITION BY
TURNING THE ECCENTRIC PIN. THE DIRECTION
OF THE ECCENTRIC PIN (B) SHOULD BE AS
SHOWN IN FIG. 1.
3 TIGHTEN THE HEXAGONAL SOCKET SCREW (A).
4 ATTACH THE FACE PLATE.
TO ADJUST NEEDLE DROP POSITION
HOLE OF NEEDLE PLATE
0.2 MM OR
MORE
0.2 MM OR
MORE
A=B
FIG. 2
HEXAGONAL
SOCKET SCREW (A)
ECCENTRIC PIN (B)
FIG. 1
THREADER
LEVER
WHEN THE STRAIGHT STITCH IS SELECTED, THE NEEDLE SHOULD BE AT THE CENTER OF THE HOLE OF
THE NEEDLE PLATE. WHEN THE MAXIMUM ZIGZAG WIDTH IS SELECTED, THE DISTANCE BETWEEN THE
NEEDLE AND THE EDGE OF THE HOLE OF THE NEEDLE PLATE AT THE RIGHT AND LEFT NEEDLE POSITIONS
SHOLD BE 0.2 MM OR MORE AS SHOWN IN FIG. 2.
11
Содержание MC6600
Страница 1: ...Revised on October 20 2005...
