AAASewing.com
59
Customizing the Settings with the Sub Control Panel
Press the MODE button until the LCD screen shows
SET
blinking.
Press the ENTER button to start the My setting mode.
q
MODE button
w
Enter button
[01] Buzzer sound control
Press the right or left arrow button to adjust
loudness of the buzzer.
To mute the buzzer, set the value to
[ 0]
.
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
NOTE:
The value shown in the illustration is the default
(preset) value of each setting.
e
Default value
[02] Eco mode setting
The sewing lights will turn off, and the LCD screen go
dark if you have not used the machine for a while.
Pressing any button will turn on the sewing lights and
screen.
The eco mode timer can be set from 1 to 30 minutes
by pressing the right or left arrow button .
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
[03] Machine ID number
When connecting two or three units of the machine to
the PC at the same time, you need to assign the
identification number to each machine.
Press the right or left arrow button to select
the ID number.
Press the ENTER button to register the new setting
or press the upward arrow button to go to the
next setting.
NOTE:
Press the downward arrow button to go back to
the previous setting.
1
03
5
01
10
02
q
w
e
Janome MB4 Embroidery Machine Instruction Manual
MB-4 Embroidery Machine
www.aaasewing.com
MB4 Owners Manual/ User Guide
