Janome Magnolia 7306 Скачать руководство пользователя страница 3

Страница: 3 / 40

Please note that on disposal, this product must be safely recycled in accordance

with relevant National legistlation relating to electrical/electronic products. If in doubt

please contact your retailer for guidance. (European Union only.)

WARNING

–

To reduce the risk of burns, fire, electric shock, or

injury to persons:

1. Do not allow children to play with the machine. The machine is not intended

for use by children or infirme persons without proper supervision.
Do not allow to be used as a toy. Close attention is necessary when this
sewing machine is used by or near children.

2. Use this appliance only for its intended use as described in this owner’s

manual.
Use only attachments recommended by the manufacturer as contained in
this owner’s manual.

3. Never operate this sewing machine if it has a damaged cord or plug, if it is

not working properly, if it has been dropped or damaged, or dropped into
water.

4. Never operate the appliance with any air opening blocked. Keep ventilation

opening of this sewing machine and foot controller free from accumulation of
lint, dust and loosen cloth.

5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where

oxygen is being administered.

8. To disconnect, turn all controls to the off (“O”) position, then remove plug

from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the

sewing machine needle.

11. Always use the proper needle plate. The wrong plate can cause the needle

to break.

12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it

to break.

14. Switch this sewing machine off (“O”) when making any adjustment in the

needle area, such as threading the needle, changing the needle, threading
the bobbin or changing the presser foot, and the like.

15. Always unplug this sewing machine from the electrical outlet when removing

covers, lubricating, or when making any other adjustments mentioned in this
owner’s manual.

SAVE THESE INSTRUCTIONS

The design and specifications are subject to change without a prior notice.

Содержание Magnolia 7306









































Результаты поиска

Содержание Magnolia 7306

Отзывы:

Похожие инструкции для Magnolia 7306

Бренды по названию

Популярные бренды

Janome Magnolia 7306, Инструкция

Результаты поиска

Содержание Magnolia 7306

Отзывы:

Похожие инструкции для Magnolia 7306

Бренды по названию

Популярные бренды