Janome M7200 страница 32 Скачать руководство пользователя

Страница: 32 / 64

Buttonholes

The following 12 types of buttonholes are available.

Square buttonhole

This buttonhole is widely used on medium to heavy
fabrics.

Round-end buttonhole

This buttonhole is used on fine to medium weight fabrics,

especially for blouses and children’s clothes.

Fine fabric buttonhole

This buttonhole is rounded at both ends and is used on

fine, delicate fabrics such as fine silk.

Keyhole buttonhole

The keyhole buttonhole is widely used on medium to
heavy fabrics. It is also suitable for larger and thicker
buttons.

Rounded keyhole buttonhole

This buttonhole is used for thicker buttons on medium
weight fabrics.

Tailored buttonhole

This durable buttonhole is used with thick buttons and
heavy fabrics.

Keyhole buttonhole (tapered reinforced end)

This buttonhole is used for tailored clothing, woven cloth
etc.

Keyhole buttonhole (heavy reinforced end)

This buttonhole is used for tailored clothing, jackets,

particularly men's wear, woven cloth etc.

Stretch buttonhole

This buttonhole is suitable for stretch fabrics. It can also
be used as a decorative buttonhole.

Knit buttonhole

This buttonhole is suitable for knit fabrics. It can also be
used as a decorative buttonhole.

Antique buttonhole

Resembles a “Hand Worked” buttonhole ideal on fine

fabrics featured in Heirloom sewing or for couture
fashions.

Welted buttonhole (Bound buttonhole)

This is a template pattern for the hand-sewn welted
buttonhole.

q w e r t y u i o !0 !1 !2

Содержание M7200

































































Результаты поиска

Содержание M7200

Отзывы:

Похожие инструкции для M7200

Бренды по названию

Популярные бренды

Janome M7200, Инструкция

Результаты поиска

Содержание M7200

Отзывы:

Похожие инструкции для M7200

Бренды по названию

Популярные бренды