Janome HD1800, Инструкция

Страница: 39 / 48

35
Use a lightweight fabric (tricot, for example).
Fold and stitch on the bias.
When the needle swings to the right, allow the
needle to just clear the folded edge of the fabric.
After stitching, open the fabric and iron press the
tucks flat to one side.
NOTE:
Increase the needle thread tension to form
prominent tucks.
w
e
q
r t
q
Pattern selector: 6
w
Presser foot: Satin stitch foot F
e
Thread tension: 6–8
r
Stitch length: 2–3
t
Stitch width: 5–6.5
Shell Tuck
6
8
7
Use this stitch to join two pieces of fabric to
create an open work appearance and add
design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and
press.
Pin the two edges to a piece of paper or tear
away backing 0.3 cm (1/8˝) apart.
q
0.3 cm (1/8˝)
Sew slowly, guiding the fabric so the needle
catches the folded edge on each side.
After finishing sewing, tear away the paper.
q
w
e
q
r t
q
Pattern selector: 1, 5 or 18
w
Presser foot: Zigzag foot A
e
Thread tension: 3–6
r
Stitch length: 0.5–1
t
Stitch width: 5–6.5
Fagoting
3
5
4