Janome Continental M7 Professional, Инструкция

Страница: 10 / 144

w
q
t
y
r
z
x
w
q
z x
e
8
Adjusting the horizontal position of the thread cutter
switch
z
Loosen the setscrews
q
under the switch.
q
Setscrew
w
Washer
x
Slide the switch to left or right, and fix it at the
desired position by tightening the setscrews with a
screwdriver.
Adjusting the vertical position of the thread cutter
switch
z
Remove the setscrews
q
and washers
w
.
x
Move the switch to forward or backward, and attach
the switch to the desired position
e
and fix it
with the setscrews
q
and washers
w
.
NOTE:
To fix the thread cutter switch to its lowest position, fix
the setscrews into the hole
r
, and then holes
t
.
Tighten the setscrews securely.
Peel off the backing paper from the rubber sole
y
and attach it to the bottom of the thread cutter switch
as shown.